Can a bridge pair become a point-to-multipoint configuration?

• Related Articles

• How does a point to multipoint system work?

  A point to multipoint system uses one access point (AP) radio with up to 16 subscriber radios (SU) to create a multipoint network link extension. Each SU must be individually keyed to the AP before installation. After key exchanging the installation ...

• Does it matter which side is the access point, and which is a subscriber unit on a point to point configuration?

  Under normal circumstances, it does not matter which side is the subscriber, and which side is the access point. Both act as transceivers, pushing and pulling the data.

• Can I add new radios to an existing AP? Can an SU become and AP and vice versa?

  All radios with exception to the bridge pairs can be used to expand the existing wireless network. To add new radios to the network, simply key the new subscriber unit to the existing access point, ensuring that the Network Name, Encryption Key, and ...

• Can the system handle multiple network cameras transmitting back to the same AP?

  Yes, so long as the combined data rate from the cameras does not exceed the radios’ capabilities. A rule of thumb is to imagine only having 60% of the aggregate bandwidth (180 Mbps for a radio with 300 Mbps aggregate bandwidth) available through the ...

• How many digital signs can be used simultaneously?

  16 digital signs can be used simultaneously with the point-to-multipoint system; one subscriber unit per sign.