Can the 5.8GHz 100Mbps radio pair with the 5.8GHz 300Mbps radio?

• Related Articles

• How long can the networking cable be between the POE injector and radio?

  For the 100 Mbps radios: cable length using shielded CAT5 or CAT6 cable is maximum 300 ft. For the 300 Mbps radios: cable length using CAT6 cable is maximum 50 ft. For the 1 Mbps radios: cable length using shielded CAT5 or CAT6 cable is maximum 300 ...

• Can a bridge pair become a point-to-multipoint configuration?

  AW900xTR and AW2400xTR can be reconfigured for point-to-multipoint configuration. AW58x00 series: Due to licensing and legal requirements, bridge pairs cannot be configured as point to multi-point. To create a point to multi-point system, you need to ...

• Can I power the radio using a POE switch?

  AvaLAN radios use forced POE injection and do not respond to 802.3af or 802.3at supported POE switches. A POE converter is required to power an AvaLAN radio. part # AW-POE-CON

• Do I have to use the POE provided with the radio?

  AvaLAN radios use forced POE injection and do not respond to 802.3af or 802.3at supported POE switches. A POE convertor is required to power an AvaLAN radio. Part # AW-POE-CON

• Which radio should I use? Why not use a WiFi system?

  WiFi systems are generally less secure, due to their popularity, and may not work well due to radio saturation and interference. Range and saturation issues are exaggerated by the wider channels utilized by WiFi and range can be reduced by the ...