How does a point to multipoint system work?

• Related Articles

• Can a bridge pair become a point-to-multipoint configuration?

  AW900xTR and AW2400xTR can be reconfigured for point-to-multipoint configuration. AW58x00 series: Due to licensing and legal requirements, bridge pairs cannot be configured as point to multi-point. To create a point to multi-point system, you need to ...

• Can the system handle multiple network cameras transmitting back to the same AP?

  Yes, so long as the combined data rate from the cameras does not exceed the radios’ capabilities. A rule of thumb is to imagine only having 60% of the aggregate bandwidth (180 Mbps for a radio with 300 Mbps aggregate bandwidth) available through the ...

• How many VoIP phones can be used simultaneously?

  Testing has shown that up to 14 VoIP phones can work simultaneously with the point-to-multipoint system. For the test, one VoIP phone was connected to each subscriber unit. The subscriber units were all linked to the same access point. 14 VoIP phones ...

• How many digital signs can be used simultaneously?

  16 digital signs can be used simultaneously with the point-to-multipoint system; one subscriber unit per sign.

• Does it matter which side is the access point, and which is a subscriber unit on a point to point configuration?

  Under normal circumstances, it does not matter which side is the subscriber, and which side is the access point. Both act as transceivers, pushing and pulling the data.