How many Ethernet devices can I attach to each subscriber unit?
How many Ethernet devices can I attach to each subscriber unit?
A total of 128 Ethernet devices are supported per access point. A subscriber unit has one Ethernet port and can connect to an Ethernet switch to aggregate multiple Ethernet devices.
Under normal circumstances, it does not matter which side is the subscriber, and which side is the access point. Both act as transceivers, pushing and pulling the data.
Testing has shown that up to 14 VoIP phones can work simultaneously with the point-to-multipoint system. For the test, one VoIP phone was connected to each subscriber unit. The subscriber units were all linked to the same access point. 14 VoIP phones ...
Two Options: Use a video server that converts analog video data to Ethernet data packets. Use a network-enabled DVR that buffers the analog video data for later transmission over Ethernet.
All access points can connect to up to 16 subscriber units, with exception to the AW900F and AW900FS radios, which can connect to up to 4 subscriber units.