Which radio should I use? Why not use a WiFi system?

• Related Articles

• Do I have to use the POE provided with the radio?

  AvaLAN radios use forced POE injection and do not respond to 802.3af or 802.3at supported POE switches. A POE convertor is required to power an AvaLAN radio. Part # AW-POE-CON

• Can I power the radio using a POE switch?

  AvaLAN radios use forced POE injection and do not respond to 802.3af or 802.3at supported POE switches. A POE converter is required to power an AvaLAN radio. part # AW-POE-CON

• How does a point to multipoint system work?

  A point to multipoint system uses one access point (AP) radio with up to 16 subscriber radios (SU) to create a multipoint network link extension. Each SU must be individually keyed to the AP before installation. After key exchanging the installation ...

• Can the system handle multiple network cameras transmitting back to the same AP?

  Yes, so long as the combined data rate from the cameras does not exceed the radios’ capabilities. A rule of thumb is to imagine only having 60% of the aggregate bandwidth (180 Mbps for a radio with 300 Mbps aggregate bandwidth) available through the ...

• Should I use fixed or dynamic IP addresses?

  Best practice is to use a fixed IP address.